1 bar?
 

i have an xp
ram and hard drive and everything...i have whats needed but the thing only stays on one bar why is it like that?

Please give some details;)
System details - help us to help you (click here)

1. OS version? WINDOWS XP
2. What firewalls you have? WINDOWS
3. How much ram? 512MB DDR SDRAM
4. Hard Disk space available? 50+ GIGS
5. Connection type? I USE A MODEM AND I HAVE TIME WARNER CABLE
6. Modem & router brand name & model numbers? WEBSTAR
7. Where are you trying to connect from house
8. What version of LimeWire (LW) & Java do you have? CHECK MY OTHER THREAD IN THE TECH SUPPORT
9. Who is your ISP (Internet Service Provider)? ROAD RUNNER
10. Do this simple test for us. Using your browser go here: http://www3.limewire.com:6346/ The page should say 'Your test worked!'. What happens when you go there? INTERNET EXPLORER CAN NOT DISPLAY PAGE
11. Are you sharing the connection with other computers or p2p sharing programs? If yes, please give details of set up. NO
12. Is this a your 1st try at LW or is this a new problem with an experienced user. 1ST TRY
13. Do you see a brick wall in front of the blue world icon at the bottom of LW's interface? YES
http://www.gnutellaforums.com/attach...1&d=1158099342
14. For those using a modem/router, how is your modem/router set up...are you port forwarding or is UPnP enabled? ????
15. What security programs are you using (antivirus etc)? Some people might not be aware that their security suite includes a firewall FPRIVATE "TYPE=PICT;ALT="NO ANTIVIRUS OR NOTHING
16. What country are you living in? Sometimes there are ISPs with the same name in more than one country (eg Clearwire in the USA & also in Ireland). USA

Make sure that LW's being allowed through the XP firewall.
User Cant Connect - LimeWire

Try changing ports. In LW tools > options > advanced > firewall config. Change LW's listening port to 64049 (you can also try other ports in the range of 49152 - 65535) > apply > ok.

What's the model of your Webstar?

im not sure...i will look later

103204605 is the s/n

DPX2203 is the model

birdy does this help

AFAIK there's no firewall in that modem. In LW go file > disconnect. Wait a couple of minutes then file > connect (sounds too obvious I know, but sometimes it works!).

Also go to tools > options > connections & make sure that 'connect on startup' is ticked. If it's not, tick it > apply > ok.

Also delete LW's preferences folder when LW's properly closed. See point 3 here.
Fixes for LimeWire
This will change all of your settings within options, you'll have to go back through afterwards & reset things. If you're not sure of your settings, go through LW's tools > options & write them all down, so that you can reset things later.

What about with a Mac ...
 

Having similar issues ...

1. OS version? Tiger OS (Mac Book)
2. What firewalls you have? none that I am aware of.
3. How much ram? It is a Macbook PRo .. I think alot
4. Hard Disk space available?117.1 GB
5. Connection type? Wireless through my router AND I HAVE TIME WARNER CABLE
6. Modem & router brand name & model numbers? Modem is a Tarayon TJ 715 - Router is a Linksys WRT54GS.
7. Where are you trying to connect from: house
8. What version of LimeWire (LW) & Java do you have? 4.10.14
9. Who is your ISP (Internet Service Provider)? ROAD RUNNER
10. Do this simple test for us. Using your browser go here: http://www3.limewire.com:6346/ The page should say 'Your test worked!'. What happens when you go there? Your test worked.
11. Are you sharing the connection with other computers or p2p sharing programs? No.
12. Is this a your 1st try at LW or is this a new problem with an experienced user. 1ST TRY
13. Do you see a brick wall in front of the blue world icon at the bottom of LW's interface? YES
http://www.gnutellaforums.com/attach...1&d=1158099342
It says firewall detecting.
14. For those using a modem/router, how is your modem/router set up...are you port forwarding or is UPnP enabled? ????
I used port forwarding and opened up 6346 and 49152-65535
15. What security programs are you using (antivirus etc)? Some people might not be aware that their security suite includes a firewall ?none that I am aware of.
16. What country are you living in? Sometimes there are ISPs with the same name in more than one country (eg Clearwire in the USA & also in Ireland). California, USA.

Hi ahr19,

Sorry - I don't use Mac. You might be better off posting in the Mac OSX section;)
http://www.gnutellaforums.com/general-mac-osx-support/

You don't say which Java you're using...I don't know which version's best for OSX...you could use the forum search to check that out, or see if this helps.
Setting up Java 1.5

When you set up port forwarding, did you make sure to set up a static IP address first? You'll need to. Check out these instructions for your router, there's a link to static IP info there. Just go through those instructions & double check your setup.
Port Forwarding for the Linksys WRT54GS

You don't have to forward the whole range of ports, just choose one (64049 is one that heaps of people use, but others are fine). Ports in that higher range are recommended because they're sometimes the ones not being blocked by ISPs. I've always used the default port myself.

So I set up the static IP address. DO I need to port forward with this new static ip address? I also checked and the Java was correct.
Do I need to restart my computer or anything? Thank you.

Yes, you'll need port forward with the new static IP address. Make sure that LW's listening port, port in the 'manual port forward' box & port forwarded within the router are all the same number.

Check the port forward instructions to see whether you have to save & reboot. If LW doesn't connect or the brick wall icon doesn't go away, restart your comp & see how it goes after that.

OK, I did all this and still see that lovely brick wall. Sigh ... If you have any other ideas for me, let me know. otherwise I will search the mac section.

Have a look through the Mac sections. Do you have the OS X firewall turned off? If you want to post in the Mac section, add a link to this thread in your post...that way people can see what you've done so far.

Connection Problem
 

1. OS version? WINDOWS XP
2. What firewalls you have? WINDOWS
3. How much ram? 512MB DDR SDRAM
4. Hard Disk space available? 50+ GIGS
5. Connection type? I USE A MODEM AND I HAVE TIME WARNER CABLE
6. Modem & router brand name & model numbers? WEBSTAR 103204605 is the s/n
DPX2203 is the model
7. Where are you trying to connect from house
8. What version of LimeWire (LW) & Java do you have? the one birdy told me to update with for java and im running LM PRO 4.14.
4
9. Who is your ISP (Internet Service Provider)? ROAD RUNNER
10. Do this simple test for us. Using your browser go here: http://www3.limewire.com:6346/ The page should say 'Your test worked!'. What happens when you go there? INTERNET EXPLORER CAN NOT DISPLAY PAGE
11. Are you sharing the connection with other computers or p2p sharing programs? If yes, please give details of set up. NO
12. Is this a your 1st try at LW or is this a new problem with an experienced user. 1ST TRY
13. Do you see a brick wall in front of the blue world icon at the bottom of LW's interface? YES
http://www.gnutellaforums.com/attach...1&d=1158099342
14. For those using a modem/router, how is your modem/router set up...are you port forwarding or is UPnP enabled? ????
15. What security programs are you using (antivirus etc)? Some people might not be aware that their security suite includes a firewall FPRIVATE "TYPE=PICT;ALT="NO ANTIVIRUS OR NOTHING
16. What country are you living in? Sometimes there are ISPs with the same name in more than one country (eg Clearwire in the USA & also in Ireland). USA



umm here are some screens of my stuff

http://i23.tinypic.com/2zz8h0i.jpg

http://i24.tinypic.com/2ep36t3.jpg

Use your computer's search to look for a folder called LimeWire (exactly as it looks here, with capital L & W)...what shows up?
For anyone else reading: DJ C Blizzard can't find a LimeWire folder within Application Data (App Data not hidden).

Roadrunner are known to shape bandwidth...
[TWC] TW Officially Announces Packet Shaping for All RR Users - dslreports.com
...since your port test fails maybe they're blocking you. Did you try changing ports? Have you tried any other p2p apps?

ares worked for me and i had used it for a long time

Did you ever change ports? Did you search your computer (search all files & folders) for a LimeWire folder?
Attachment 3798

It's got me stuffed why you can't find it within App Data.

i do this stuff tomorrw it 1 am here i tired...goodnight and thanks for the help

my problem is EXACTLY the same. It seems that alot of people have just recently been having this problem. I wonder why??