Mac OSX 10.5.4 need help
 

Limewire doesn't connect. I added Limewire into firewall security but it doesn't help. Just have 1 block and indicates limewire has detected firewall.

We will need some more details to help :) System details - help us to help you (click on blue link)

system info for Imac problem
 

Imac OSX version 10.5.4
Processor 2.8 GHz intel core 2 duo
Memory 2 GB 800 MHz DDR2 SDRAM
Firewall: not sure-whatever came with unit-none added
Hard disk available 249GB
Connection: DSL (actiontec 54 Mbps DSL gateway)
Trying to connect from home
Qwest is ISP
ran test-came back "Your test worked"
Not sharing connection
Windows PC crashed-decided to go MAC-new MAC user-had to rebuy membership and download Limewire to MAC-using exisiting modem and printers-can access internet through other programs
There is a brick wall in front of the world
Imac has FileVault-but it's turned off-Firewall logging enabled
Living in Iowa

First try these options: http://www.gnutellaforums.com/connec...t-connect.html

If you turn off your OSX firewall & LW still cannot connect, then chances are the problem is your modem/router.

Make sure your Mac LW is not using same connection or listening port as any other program or computer at your home. Check this on mac via LW preferences > Options > Advanced > Firewall.

You may need to port forward your Actiontec. To port forward you first need a static ip: OSX static ip instructions

Then set up a port that you will use in LW. Perhaps choose one between ports 49152 - 65535 such as 64049 for both TCP & UDP
Last step is Manual port forward instructions & sample image.