Gnutella Forums  

Go Back   Gnutella Forums > Current Gnutella Client Forums > LimeWire+WireShare (Cross-platform) > Technical Support > General Vista, Windows 7 or later Support
Register FAQ The Twelve Commandments Members List Calendar Arcade Find the Best VPN Today's Posts

General Vista, Windows 7 or later Support Concerns all issues with using LimeWire or WireShare in the Vista and Windows 7, 8 or 10 operating system


Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old April 30th, 2007
Novicius
 
Join Date: April 30th, 2007
Posts: 2
up10ad is flying high
Default Vista no connection, read all posts here...

I'm having trouble connecting with Vista, and I've already read all the posts here. First, let me give you my information:

1. OS version? Vista Ultimate completely updated
2. What firewalls you have? Vista's only
3. How much ram? 2G
4. Hard Disk space available? 35G
5. Connection type? LAN broadband, DS3 pipe (I own the ISP)
6. Modem & router brand name & model numbers? Cisco 7206 wide open
7. Where are you trying to connect from? work, NC Telecom, my ISP
8. What version of LimeWire (LW) & Java do you have? LW 4.13.2.Pro, Java 1.6.0_01
9. Who is your ISP provider? NC Telecom (my company), we block nothing in our routers and have no packet shaping or other filtering active.
10. Do this simple test for us. Using your browser go here: http://www3.limewire.com:6346/ The page should say 'Your test worked!'. What happens when you go there? IT WORKED!
11. Are you sharing the connection with other computers or p2p sharing programs? If yes, please give details of set up. Several other PC in the office are on the LAN, at least one XP system is using LimeWire fine.
12. Is this a your 1st try at LW or is this a new problem with an experienced user. New problem with experienced user on a new PC
13. Do you see a brick wall in front of the blue world icon at the bottom of LW's interface? Yes, even if I disable the Windows firewall. I checked windows firewall and it has the LW access exception for both in and out.

I did a manual install of JRE 6.1 as suggested. This Dell M2010 XPS laptop was delivered without any virus protection and I added AVG, so McAfee isn't an issue.

Things that make you go HMMMMMMM..... any suggestions?
Reply With Quote
  #2 (permalink)  
Old May 1st, 2007
wondering why's Avatar
You caught my eye
 
Join Date: September 11th, 2005
Location: Brisbane, Australia
Posts: 6,677
wondering why is just really nice
Default

I google your Router and the info I found says that there is a Nat Firewall built into it...Have you disabled this feature?? If not you may have to Forward a Port for Limewire...
Cisco 7206 VXR Router (7206VXR/NPE-G1) Specs - DealTime
__________________


If you dont live for something...
You die for nothing...
Reply With Quote
  #3 (permalink)  
Old May 1st, 2007
Novicius
 
Join Date: April 30th, 2007
Posts: 2
up10ad is flying high
Default

Thanks for the reply. I forgot to mention that the Cisco is not doing NAT, and that my machine has a real-world routable IP address. I also tried it on my home PC which is the same setup, but is behind a Cisco 1700 series router, which has minimal configuration and no NAT. The only routing in it is interface Serial0, ip unnumbered FastEthernet0. My home PC also has a routable IP of 38.116.129.243, but experiences the same problem.

At home I disabled the Vista firewall and AVG (which doesn't have a firewall anyway) but the firewall icon still shows up, is that normal?

Last edited by up10ad; May 1st, 2007 at 05:55 AM. Reason: added info...
Reply With Quote
  #4 (permalink)  
Old May 1st, 2007
wondering why's Avatar
You caught my eye
 
Join Date: September 11th, 2005
Location: Brisbane, Australia
Posts: 6,677
wondering why is just really nice
Default

No you shouldn't see a firewall there at all...
This is a hard one....

You could try these fixes and see if they work at all...
Try changing the listen Port number and tick the manual port box and enter 64049 into both and select apply....(or any number between 49152 up to 65535, but enter the same number into both)

No luck there ???
Try uninstalling your Java from the add/remove programs and then re-install the JRE offline version....(4th one down)
Java SE Downloads

Then uninstall Limewire using the uninstaller which is found in start > all programs > limewire...then re-install it using the offline installer...
http://www.limewire.com/english/cont...oadfree2.shtml

If that does not help with your problem try deleting your preference folder...
Fixes for Limewire when LW isn't operating as it should

Still no luck ??
Try the Beta verion of Limewire...

I hope one of these fixes works for you... If they don't let me know and I'll get onto Grandpa (forum member) about your situation...
__________________


If you dont live for something...
You die for nothing...
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
LW Vista connection problem rajhajane General Vista, Windows 7 or later Support 3 April 11th, 2007 09:51 AM
No connection with Vista awaseta2004 General Vista, Windows 7 or later Support 12 March 19th, 2007 04:20 PM
Connection. I've read and read. rolyasm Connection Problems 2 February 8th, 2006 09:18 PM
can not download, have read lots of other posts still no help Nicholette Download/Upload Problems 0 December 10th, 2005 11:12 AM
Problem deleting files. Have read other posts. JonnyDangerous General Windows Support 3 September 12th, 2004 06:35 AM


All times are GMT -7. The time now is 07:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 ©2011, Crawlability, Inc.

Copyright © 2020 Gnutella Forums.
All Rights Reserved.