Servers in port 80

#1 (**permalink**) July 1st, 2002

Hi.
I'm behind a firewall ... could someone tell a node with incoming port 80 to connect to?

Thanks in advance

Rodrigo

#2 (**permalink**) July 1st, 2002

use limewire from limewire.com
morpheus is full of bugs and clogs up other networks anyway.

pass the word

#3 (**permalink**) July 1st, 2002

You'd probably be more comfortable with the Gnucleus interface since it that is what Morpheus is based off of. http://www.gnucleus.net/

Anyway, if you stick with Morpheus, simply go into options and check "I am behind a firewall" and you should be set.

Morgwen · #4 (**permalink**) July 2nd, 2002

Quote:

Originally posted by Unregistered
Anyway, if you stick with Morpheus, simply go into options and check "I am behind a firewall" and you should be set.

I think he has to change the port also... as I understand this is the only free port he has and Gnutella uses the port 6346!

Morgwen

#5 (**permalink**) July 2nd, 2002

Quote:

Originally posted by Morgwen

I think he has to change the port also... as I understand this is the only free port he has and Gnutella uses the port 6346!

Morgwen

You're right. This is my only free port and I'm not the administrator of my network.
Is there any node in port 80?

Joakim Agren · #6 (**permalink**) July 2nd, 2002

Hello!

No there is no node on Gnutella on port 80.Port 8080 is used for the Internet(Web).Gnutella is on Port 6346 and 6347 which is the ports that you have to enable in the FireWall in order for you to be on it.

Morgwen · #7 (**permalink**) July 2nd, 2002

Quote:

Originally posted by Unregistered
Is there any node in port 80?

You can change your port in your node... but the question is, does your firewall block the other ports in both ways? If so you wouldn´t be able to connect to other nodes which don´t use the port 80 either... if your firewall block only for outgoing traffic you shouldn´t have problems!

Morgwen

Morgwen · #8 (**permalink**) July 2nd, 2002

Quote:

Originally posted by Joakim Agren
No there is no node on Gnutella on port 80.Port 8080 is used for the Internet(Web).Gnutella is on Port 6346 and 6347 which is the ports that you have to enable in the FireWall in order for you to be on it.

This is not right, the standard port is 6346 but you can choose every available port...

Morgwen

Joakim Agren · #9 (**permalink**) July 2nd, 2002

Hello!

Sorry for my post beeing a bit unclear.This is what I meant to say:

Yes you can change the port but my personal experience is that you will get less results when doing so and also other persons will have a difficult time getting a decent connection to you.

Yes the standard port is 6346 but the 6347 is the network port that listens for other hosts.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
when a port is busy like say 6346 what is another good port # to use for my other	Butterfly9	LimeWire+WireShare Tips and Tricks	0	January 31st, 2007 11:47 AM
Port numbers for firewall port forwarding?	Frozen_Charlotte	Connection Problems	1	January 8th, 2003 09:53 AM
Does Limewire's servers offer another port other than 6346 for connecting to?	Unregistered	Connection Problems	4	June 13th, 2002 09:04 AM
Can I use servers not on port 6346?	Dev	Gnotella (Windows)	3	March 3rd, 2001 11:18 PM
Defeating blocked port: How to get list of servers for alternate ports (e.g. :80)???	Firewall Fred	Gnotella (Windows)	0	February 9th, 2001 11:36 PM