|
Register | FAQ | The Twelve Commandments | Members List | Calendar | Arcade | Find the Best VPN | Today's Posts | Search |
Open Discussion topics Discuss the time of day, whatever you want to. This is the hangout area. If you have LimeWire problems, post them here too. |
| LinkBack | Thread Tools | Display Modes |
| ||||
Uh, ok. At the top of this page click Limewire (Cross-platform) and the click the announcement: Forums rules at the end of that page. You'll know what info you'll have to post about your computer by reading them (among other things).
__________________ iMac G4 OSX 10.3.9 RAM 256MB LW 4.10.5 Basic ADSL anything from 3 to 8Mbps/around 1024kbps "Raise your can of Beer on high And seal your fate forever Our best years have passed us by The Golden Age Of Leather" -Blue Öyster Cult- |
| ||||
Where is your downld folder for LW? Check your LW Prefs & look at 'Saving'. If it is different to your LW Incomplete folder, then you will not find your completed files in the Library window unless you are sharing your downld folder. If so then in the Library window click onto the name of this dwnld folder on your shared folders list on the top-left of the lib. window. Press Explore button on RH side to view its contents. Shared folders can be set at 'Shared' in your Prefs. If this deosn't help then post back in this thread. More info can be found at: http://www.gnutellaforums.com/announ...?s=&forumid=29 |
| ||||
When your dwnlds finish they should not go to the library unless you share your dwnld folder. They should move from the incomplete folder to the dwnlds folder. Go to LW's menu-Tools-Options-Saving menu & you'll find the location & name of your dwnld folder. You can either find it manually or use Explorer & type in the name of the dwnld folder. This is where your dwlded files will be. If you still have any confusion/problems, post back to this thread. |
| ||||
Actually upon rereading your post, perhaps your dwnld prefs have changed. Again, check that the dwnld location is where it should be, otherwise reset it using the above formula & use the Add & Apply buttons. Hope this helps! |
| |